Accepts an dry contact impulse(water meter) and produces 2 x isolated repeat contacts.

Repeat pulse outputs operates at the same frequency and time periods of the input pulse

DIN 2 module clip on enclosure

220V Mains or 24V AC/DC powered

Repeat signals are isolated from each other as well as the input signal

Power and Pulse LED’s

Outputs are rated 50V DC maximum @ 100mA

Accepts an dry contact impulse(water meter) and produces 3 x isolated repeat contacts.

Repeat pulse outputs operates at the same frequency and time periods of the input pulse

DIN 2 module clip on enclosure

220V Mains or 24V AC/DC powered

Repeat signals are isolated from each other as well as the input signal

Power and Pulse LED’s

Outputs are rated 50V DC maximum @ 100mA

Dispense chemicals via dosing pump proportionally to flow.

Accepts an impulse signal(dry contact) from a water meter and then activates a timer.

Programmable pulse accumulator(totaliser) operates timer which drives the output after a pre-

programmed number of pulses are received.

Programmable timer counts in minutes or seconds, giving a range of 1 second up to 99 minutes.

Output test facility

Digital display of pulses and timer.

DIN 2 module clip on enclosure

220V Mains powered

Operate LED

Output is rated 250V @ 5A resistive

Division of pulses from water meter. –Counts 1 - 99 pulses per batch and then generate one pulse to dosing

pump

Allows a larger capacity pump to be used in an application where the water meter generates too many

impulses

Output test facility

Digital display of pulses

DIN 2 module clip on enclosure

220V Mains AC powered

Pulse operate LED

Output is rated 50V DC maximum @ 100mA

Has an pulse input for a water meter.

Triggers on 1 pulse and provide up to 99 pulses

Should more impulses be received whilst multiplying, remaining pulses are accumulated

Allows one to use a smaller size pump with a large water meter that generates only 1 pulse per 100 or 1000 litres

Output test facility

Digital display of pulses.

DIN 2 module clip on enclosure

220V Mains AC powered

Operate LED’s

Output is rated 50V DC maximum @ 100mA